Minor updates.

btcpayserver/backup_btcpay.sh

@@ -11,7 +11,7 @@ echo "INFO: Starting BTCPAY Backup script for host '$BTCPAY_FQDN'."
 
 sleep 5
 
-ssh "$BTCPAY_FQDN" "mkdir -p $REMOTE_HOME/backups; cd $REMOTE_HOME/; sudo BTCPAY_BASE_DIRECTORY=$REMOTE_HOME bash -c $BTCPAY_SERVER_APPPATH/btcpay-down.sh"
+ssh "$BTCPAY_FQDN" "mkdir -p $REMOTE_BACKUP_PATH; cd $REMOTE_DATA_PATH/; sudo BTCPAY_BASE_DIRECTORY=$REMOTE_DATA_PATH bash -c $BTCPAY_SERVER_APPPATH/btcpay-down.sh"
 
 # TODO; not sure if this is necessary, but we want to give the VM additional time to take down all services
 # that way processes can run shutdown procedures and leave files in the correct state.
@@ -19,13 +19,13 @@ sleep 10
 
 # TODO enable encrypted archives
 # TODO switch to btcpay-backup.sh when on LXD fully.
-scp ./remote_scripts/btcpay-backup.sh "$BTCPAY_FQDN:$REMOTE_HOME/btcpay-backup.sh"
-ssh "$BTCPAY_FQDN" "sudo cp $REMOTE_HOME/btcpay-backup.sh $BTCPAY_SERVER_APPPATH/btcpay-backup.sh && sudo chmod 0755 $BTCPAY_SERVER_APPPATH/btcpay-backup.sh"
-ssh "$BTCPAY_FQDN" "cd $REMOTE_HOME/; sudo BTCPAY_BASE_DIRECTORY=$REMOTE_HOME BTCPAY_DOCKER_COMPOSE=$REMOTE_HOME/btcpayserver-docker/Generated/docker-compose.generated.yml bash -c $BTCPAY_SERVER_APPPATH/btcpay-backup.sh"
+scp ./remote_scripts/btcpay-backup.sh "$BTCPAY_FQDN:$REMOTE_DATA_PATH/btcpay-backup.sh"
+ssh "$BTCPAY_FQDN" "sudo cp $REMOTE_DATA_PATH/btcpay-backup.sh $BTCPAY_SERVER_APPPATH/btcpay-backup.sh && sudo chmod 0755 $BTCPAY_SERVER_APPPATH/btcpay-backup.sh"
+ssh "$BTCPAY_FQDN" "cd $REMOTE_DATA_PATH/; sudo BTCPAY_BASE_DIRECTORY=$REMOTE_DATA_PATH BTCPAY_DOCKER_COMPOSE=$REMOTE_DATA_PATH/btcpayserver-docker/Generated/docker-compose.generated.yml bash -c $BTCPAY_SERVER_APPPATH/btcpay-backup.sh"
 
 # next we pull the resulting backup archive down to our management machine.
-ssh "$BTCPAY_FQDN" "sudo cp /var/lib/docker/volumes/backup_datadir/_data/backup.tar.gz $REMOTE_HOME/backups/btcpay.tar.gz"
-ssh "$BTCPAY_FQDN" "sudo chown ubuntu:ubuntu $REMOTE_HOME/backups/btcpay.tar.gz"
+ssh "$BTCPAY_FQDN" "sudo cp /var/lib/docker/volumes/backup_datadir/_data/backup.tar.gz $REMOTE_BACKUP_PATH/btcpay.tar.gz"
+ssh "$BTCPAY_FQDN" "sudo chown ubuntu:ubuntu $REMOTE_BACKUP_PATH/btcpay.tar.gz"
 
 # if the backup archive path is not set, then we set it. It is usually set only when we are running a migration script.
 BTCPAY_LOCAL_BACKUP_PATH="$SITES_PATH/$PRIMARY_DOMAIN/backups/btcpayserver"
@@ -34,6 +34,6 @@ if [ -z "$BACKUP_BTCPAY_ARCHIVE_PATH" ]; then
 fi
 
 mkdir -p "$BTCPAY_LOCAL_BACKUP_PATH"
-scp "$BTCPAY_FQDN:$REMOTE_HOME/backups/btcpay.tar.gz" "$BACKUP_BTCPAY_ARCHIVE_PATH"
+scp "$BTCPAY_FQDN:$REMOTE_BACKUP_PATH/btcpay.tar.gz" "$BACKUP_BTCPAY_ARCHIVE_PATH"
 
 echo "INFO: Created backup archive '$BACKUP_BTCPAY_ARCHIVE_PATH' for host '$BTCPAY_FQDN'."

btcpayserver/bashrc.txt

@@ -1,6 +1,3 @@
-# we append this text to the btcpay server /home/ubuntu/.bashrc so
-# logged in users have more common access to the variou
-
-alias bitcoin-cli="bitcoin-cli.sh $@"
-alias lightning-cli="bitcoin-lightning-cli.sh $@"
-
+# these aliases are simply calling the btcpay server scripts.
+alias bitcoin-cli="/home/ubuntu/ss-data/btcpayserver-docker/bitcoin-cli.sh $@"
+alias lightning-cli="/home/ubuntu/ss-data/btcpayserver-docker/bitcoin-lightning-cli.sh $@"

btcpayserver/go.sh

@@ -5,14 +5,13 @@ cd "$(dirname "$0")"
 
 export DOCKER_HOST="ssh://ubuntu@$BTCPAY_FQDN"
 
-# run the btcpay setup script if it hasn't been done before.
-if [ "$(ssh "$BTCPAY_FQDN" [[ ! -f "$REMOTE_HOME/btcpay.complete" ]]; echo $?)" -eq 0 ]; then
+if [ "$STOP_SERVICES" = true ]; then
+    # run the update.
+    ssh "$FQDN" "bash -c $BTCPAY_SERVER_APPPATH/btcpay-down.sh"
+else
     ./stub_btcpay_setup.sh
-    BACKUP_BTCPAY=false
 fi
 
-RUN_SERVICES=true
-
 # we will re-run the btcpayserver provisioning scripts if directed to do so.
 # if an update does occur, we grab another backup.
 if [ "$UPDATE_BTCPAY" = true ]; then
@@ -22,7 +21,7 @@ if [ "$UPDATE_BTCPAY" = true ]; then
     # btcpay-update.sh brings services back up, but does not take them down.
     ssh "$FQDN" "sudo bash -c $BTCPAY_SERVER_APPPATH/btcpay-update.sh"
 
-    sleep 20
+    sleep 30
 
 elif [ "$RESTORE_BTCPAY" = true ]; then
     # run the update.
@@ -31,15 +30,6 @@ elif [ "$RESTORE_BTCPAY" = true ]; then
     
     ./restore.sh
 
-    RUN_SERVICES=true
-    BACKUP_BTCPAY=false
-
-elif [ "$RECONFIGURE_BTCPAY_SERVER" == true ]; then
-    # the administrator may have indicated a reconfig;
-    # if so, we re-run setup script.
-    ./stub_btcpay_setup.sh
-
-    RUN_SERVICES=true
     BACKUP_BTCPAY=false
 fi
 
@@ -49,10 +39,8 @@ if [ "$BACKUP_BTCPAY" = true ]; then
     ./backup_btcpay.sh
 fi
 
-if [ "$RUN_SERVICES" = true ] && [ "$STOP_SERVICES" = false ]; then
+if [ "$STOP_SERVICES" = false ]; then
     # The default is to resume services, though admin may want to keep services off (eg., for a migration)
     # we bring the services back up by default.
     ssh "$FQDN" "bash -c $BTCPAY_SERVER_APPPATH/btcpay-up.sh"
 fi
-
-echo "FINISHED btcpayserver/go.sh"

btcpayserver/restore.sh

@@ -3,27 +3,17 @@
 set -e
 cd "$(dirname "$0")"
 
-if [ "$RESTORE_BTCPAY"  = false ]; then 
-    exit 0
-fi
-
 if [ -f "$BACKUP_BTCPAY_ARCHIVE_PATH" ]; then
     # push the restoration archive to the remote server
     echo "INFO: Restoring BTCPAY Server: $BACKUP_BTCPAY_ARCHIVE_PATH"
 
-    REMOTE_BACKUP_PATH="$REMOTE_HOME/backups/btcpayserver"
-    ssh "$FQDN" mkdir -p "$REMOTE_BACKUP_PATH"
-    REMOTE_BTCPAY_ARCHIVE_PATH="$REMOTE_BACKUP_PATH/btcpay.tar.gz"
+    BTCPAY_REMOTE_BACKUP_PATH="$REMOTE_BACKUP_PATH/btcpayserver"
+    ssh "$FQDN" mkdir -p "$BTCPAY_REMOTE_BACKUP_PATH"
+    REMOTE_BTCPAY_ARCHIVE_PATH="$BTCPAY_REMOTE_BACKUP_PATH/btcpay.tar.gz"
     scp "$BACKUP_BTCPAY_ARCHIVE_PATH" "$FQDN:$REMOTE_BTCPAY_ARCHIVE_PATH"
 
-    # we clean up any old containers first before restoring.
-    ssh "$FQDN" docker system prune -f
-
     # push the modified restore script to the remote directory, set permissions, and execute.
-    scp ./remote_scripts/btcpay-restore.sh "$FQDN:$REMOTE_HOME/btcpay-restore.sh"
-    ssh "$FQDN" "sudo mv $REMOTE_HOME/btcpay-restore.sh $BTCPAY_SERVER_APPPATH/btcpay-restore.sh && sudo chmod 0755 $BTCPAY_SERVER_APPPATH/btcpay-restore.sh"
-    ssh "$FQDN" "cd $REMOTE_HOME/; sudo BTCPAY_BASE_DIRECTORY=$REMOTE_HOME BTCPAY_DOCKER_COMPOSE=$REMOTE_HOME/btcpayserver-docker/Generated/docker-compose.generated.yml bash -c '$BTCPAY_SERVER_APPPATH/btcpay-restore.sh $REMOTE_BTCPAY_ARCHIVE_PATH'"
-
-    # now, we're going to take things down because aparently we this needs to be re-exececuted.
-    ssh "$FQDN" "bash -c $BTCPAY_SERVER_APPPATH/btcpay-down.sh"
+    scp ./remote_scripts/btcpay-restore.sh "$FQDN:$REMOTE_DATA_PATH/btcpay-restore.sh"
+    ssh "$FQDN" "sudo mv $REMOTE_DATA_PATH/btcpay-restore.sh $BTCPAY_SERVER_APPPATH/btcpay-restore.sh && sudo chmod 0755 $BTCPAY_SERVER_APPPATH/btcpay-restore.sh"
+    ssh "$FQDN" "cd $REMOTE_DATA_PATH/; sudo BTCPAY_BASE_DIRECTORY=$REMOTE_DATA_PATH BTCPAY_DOCKER_COMPOSE=$REMOTE_DATA_PATH/btcpayserver-docker/Generated/docker-compose.generated.yml bash -c '$BTCPAY_SERVER_APPPATH/btcpay-restore.sh $REMOTE_BTCPAY_ARCHIVE_PATH'"
 fi

btcpayserver/stub_btcpay_setup.sh

@@ -3,6 +3,8 @@
 set -e
 cd "$(dirname "$0")"
 
+
+
 # default is for regtest
 CLIGHTNING_WEBSOCKET_PORT=9736
 if [ "$BITCOIN_CHAIN" = testnet ]; then
@@ -13,6 +15,7 @@ fi
 
 export CLIGHTNING_WEBSOCKET_PORT="$CLIGHTNING_WEBSOCKET_PORT"
 
+
 # export BTCPAY_FASTSYNC_ARCHIVE_FILENAME="utxo-snapshot-bitcoin-testnet-1445586.tar"
 # BTCPAY_REMOTE_RESTORE_PATH="/var/lib/docker/volumes/generated_bitcoin_datadir/_data"
 
@@ -55,24 +58,20 @@ export BTCPAYGEN_CRYPTO1="btc"
 export BTCPAYGEN_ADDITIONAL_FRAGMENTS="opt-save-storage-s;bitcoin-clightning.custom;"
 export BTCPAYGEN_REVERSEPROXY="nginx"
 export BTCPAY_ENABLE_SSH=false
-export BTCPAY_BASE_DIRECTORY=${REMOTE_HOME}
+export BTCPAY_BASE_DIRECTORY=${REMOTE_DATA_PATH}
 export BTCPAYGEN_EXCLUDE_FRAGMENTS="nginx-https;"
 export REVERSEPROXY_DEFAULT_HOST="$BTCPAY_USER_FQDN"
 
-if [ "\$NBITCOIN_NETWORK" != regtest ]; then
-    # run fast_sync if it's not been done before.
-    if [ ! -f /home/ubuntu/fast_sync_completed ]; then
-        cd ./contrib/FastSync
-        ./load-utxo-set.sh
-        touch /home/ubuntu/fast_sync_completed
-        cd -
-    fi
-fi
+# if [ "\$NBITCOIN_NETWORK" != regtest ]; then
+#     cd ./contrib/FastSync
+#     ./load-utxo-set.sh
+#     cd -
+# fi
 
 # next we create fragments to customize various aspects of the system
 # this block customizes clightning to ensure the correct endpoints are being advertised
 # We want to advertise the correct ipv4 endpoint for remote hosts to get in touch.
-cat > ${REMOTE_HOME}/btcpayserver-docker/docker-compose-generator/docker-fragments/bitcoin-clightning.custom.yml <<EOF
+cat > ${REMOTE_DATA_PATH}/btcpayserver-docker/docker-compose-generator/docker-fragments/bitcoin-clightning.custom.yml <<EOF
 
 services:
   clightning_bitcoin:
@@ -90,22 +89,17 @@ EOF
 # run the setup script.
 . ./btcpay-setup.sh -i
 
-touch ${REMOTE_HOME}/btcpay.complete
-
+touch ${REMOTE_DATA_PATH}/btcpay.complete
+chown ubuntu:ubuntu ${REMOTE_DATA_PATH}/btcpay.complete
 EOL
 
-# send an updated ~/.bashrc so we have quicker access to cli tools
-scp ./bashrc.txt "ubuntu@$FQDN:$REMOTE_HOME/.bashrc"
-ssh "$BTCPAY_FQDN" "chown ubuntu:ubuntu $REMOTE_HOME/.bashrc"
-ssh "$BTCPAY_FQDN" "chmod 0664 $REMOTE_HOME/.bashrc"
 
 # send the setup script to the remote machine.
-scp "$SITE_PATH/btcpay.sh" "ubuntu@$FQDN:$REMOTE_HOME/btcpay_setup.sh"
-ssh "$BTCPAY_FQDN" "chmod 0744 $REMOTE_HOME/btcpay_setup.sh"
+scp "$SITE_PATH/btcpay.sh" "ubuntu@$FQDN:$REMOTE_DATA_PATH/btcpay_setup.sh"
+ssh "$BTCPAY_FQDN" "chmod 0744 $REMOTE_DATA_PATH/btcpay_setup.sh"
 
 # script is executed under sudo
-ssh "$BTCPAY_FQDN" "sudo bash -c $REMOTE_HOME/btcpay_setup.sh"
-
+ssh "$BTCPAY_FQDN" "sudo bash -c $REMOTE_DATA_PATH/btcpay_setup.sh"
 
 # lets give time for the containers to spin up
 sleep 10

create_lxc_base.sh

@@ -5,6 +5,10 @@ cd "$(dirname "$0")"
 
 bash -c "./stub_lxc_profile.sh --lxd-hostname=$BASE_IMAGE_VM_NAME"
 
+if lxc list -q --project default | grep -q "$BASE_IMAGE_VM_NAME" ; then
+    lxc delete -f "$BASE_IMAGE_VM_NAME" --project=default
+fi
+
 # let's download our base image.
 if ! lxc image list --format csv --columns l | grep -q "$UBUNTU_BASE_IMAGE_NAME"; then
     # if the image if cached locally, import it from disk, otherwise download it from ubuntu
@@ -28,52 +32,52 @@ if lxc list --format csv -q | grep -q "$UBUNTU_BASE_IMAGE_NAME"; then
     fi
 else
     # the base image is ubuntu:22.04.
-    lxc init --profile="$BASE_IMAGE_VM_NAME" "$UBUNTU_BASE_IMAGE_NAME" "$BASE_IMAGE_VM_NAME" --vm
+    lxc init --profile="$BASE_IMAGE_VM_NAME" "$UBUNTU_BASE_IMAGE_NAME" "$BASE_IMAGE_VM_NAME" --vm --project=default
 
     # TODO move this sovereign-stack-base construction VM to separate dedicated IP
-    lxc config set "$BASE_IMAGE_VM_NAME"
+    lxc config set "$BASE_IMAGE_VM_NAME" --project=default
 
-    for CHAIN in mainnet testnet; do
-        for DATA in blocks chainstate; do
-            lxc storage volume attach ss-base "$CHAIN-$DATA" "$BASE_IMAGE_VM_NAME" "/home/ubuntu/.ss/cache/bitcoin/$CHAIN/$DATA"
-        done
-    done
+    # for CHAIN in mainnet testnet; do
+    #     for DATA in blocks chainstate; do
+    #         lxc storage volume attach ss-base "$CHAIN-$DATA" "$BASE_IMAGE_VM_NAME" "/home/ubuntu/bitcoin/$DATA"
+    #     done
+    # done
 
-    lxc start "$BASE_IMAGE_VM_NAME"
+    lxc start "$BASE_IMAGE_VM_NAME" --project=default
 
     sleep 15
-    while lxc exec "$BASE_IMAGE_VM_NAME" -- [ ! -f /var/lib/cloud/instance/boot-finished ]; do
+    while lxc exec "$BASE_IMAGE_VM_NAME" --project=default -- [ ! -f /var/lib/cloud/instance/boot-finished ]; do
         sleep 1
     done
 
     # ensure the ssh service is listening at localhost
-    lxc exec "$BASE_IMAGE_VM_NAME" -- wait-for-it -t 100 127.0.0.1:22
+    lxc exec "$BASE_IMAGE_VM_NAME" --project=default -- wait-for-it -t 100 127.0.0.1:22
 
-    # If we have any chaninstate or blocks in our SSME, let's push them to the
-    # remote host as a zfs volume that way deployments can share a common history
-    # of chainstate/blocks.
-    for CHAIN in testnet mainnet; do
-        for DATA in blocks chainstate; do
-            # if the storage snapshot doesn't yet exist, create it.
-            if ! lxc storage volume list ss-base -q --format csv -c n | grep -q "$CHAIN-$DATA/snap0"; then
-                DATA_PATH="/home/ubuntu/.ss/cache/bitcoin/$CHAIN/$DATA"
-                if [ -d "$DATA_PATH" ]; then
-                    COMPLETE_FILE_PATH="$DATA_PATH/complete"
-                    if lxc exec "$BASE_IMAGE_VM_NAME" -- [ ! -f "$COMPLETE_FILE_PATH" ]; then
-                        lxc file push --recursive --project=default "$DATA_PATH/" "$BASE_IMAGE_VM_NAME""$DATA_PATH/"
-                        lxc exec "$BASE_IMAGE_VM_NAME" -- su ubuntu - bash -c "echo $(date) > $COMPLETE_FILE_PATH"
-                        lxc exec "$BASE_IMAGE_VM_NAME" -- chown -R 999:999 "$DATA_PATH/$DATA"
-                    else
-                        echo "INFO: it appears as though $CHAIN/$DATA has already been initialized. Continuing."
-                    fi
-                fi
-            fi
-        done
-    done
+    # # If we have any chaninstate or blocks in our SSME, let's push them to the
+    # # remote host as a zfs volume that way deployments can share a common history
+    # # of chainstate/blocks.
+    # for CHAIN in testnet mainnet; do
+    #     for DATA in blocks chainstate; do
+    #         # if the storage snapshot doesn't yet exist, create it.
+    #         if ! lxc storage volume list ss-base -q --format csv -c n | grep -q "$CHAIN-$DATA/snap0"; then
+    #             DATA_PATH="/home/ubuntu/.ss/cache/bitcoin/$CHAIN/$DATA"
+    #             if [ -d "$DATA_PATH" ]; then
+    #                 COMPLETE_FILE_PATH="$DATA_PATH/complete"
+    #                 if lxc exec "$BASE_IMAGE_VM_NAME" -- [ ! -f "$COMPLETE_FILE_PATH" ]; then
+    #                     lxc file push --recursive --project=default "$DATA_PATH/" "$BASE_IMAGE_VM_NAME""$DATA_PATH/"
+    #                     lxc exec "$BASE_IMAGE_VM_NAME" -- su ubuntu - bash -c "echo $(date) > $COMPLETE_FILE_PATH"
+    #                     lxc exec "$BASE_IMAGE_VM_NAME" -- chown -R 999:999 "$DATA_PATH/$DATA"
+    #                 else
+    #                     echo "INFO: it appears as though $CHAIN/$DATA has already been initialized. Continuing."
+    #                 fi
+    #             fi
+    #         fi
+    #     done
+    # done
 
     # stop the VM and get a snapshot.
-    lxc stop "$BASE_IMAGE_VM_NAME"
-    lxc snapshot "$BASE_IMAGE_VM_NAME" "$UBUNTU_BASE_IMAGE_NAME"
+    lxc stop "$BASE_IMAGE_VM_NAME" --project=default
+    lxc snapshot "$BASE_IMAGE_VM_NAME" "$UBUNTU_BASE_IMAGE_NAME" --project=default
 
 fi
 
@@ -81,14 +85,14 @@ echo "INFO: Publishing '$BASE_IMAGE_VM_NAME' as image '$DOCKER_BASE_IMAGE_NAME'.
 lxc publish --public "$BASE_IMAGE_VM_NAME/$UBUNTU_BASE_IMAGE_NAME" --project=default --alias="$DOCKER_BASE_IMAGE_NAME" --compression none
 
 echo "INFO: Success creating the base image. Deleting artifacts from the build process."
-lxc delete -f "$BASE_IMAGE_VM_NAME"
+lxc delete -f "$BASE_IMAGE_VM_NAME" --project=default
 
-# now let's get a snapshot of each of the blocks/chainstate directories.
-for CHAIN in testnet mainnet; do
-    for DATA in blocks chainstate; do
-        if ! lxc storage volume list ss-base -q --format csv -c n | grep -q "$CHAIN-$DATA/snap0"; then
-            echo "INFO: Creating a snapshot 'ss-base/$CHAIN-$DATA/snap0'."
-            lxc storage volume snapshot ss-base --project=default "$CHAIN-$DATA"
-        fi
-    done
-done
+# # now let's get a snapshot of each of the blocks/chainstate directories.
+# for CHAIN in testnet mainnet; do
+#     for DATA in blocks chainstate; do
+#         if ! lxc storage volume list ss-base -q --format csv -c n | grep -q "$CHAIN-$DATA/snap0"; then
+#             echo "INFO: Creating a snapshot 'ss-base/$CHAIN-$DATA/snap0'."
+#             lxc storage volume snapshot ss-base --project=default "$CHAIN-$DATA"
+#         fi
+#     done
+# done

deploy.sh

@@ -35,29 +35,23 @@ if lxc remote get-default | grep -q "production"; then
 
 fi
 
-# switch to the defult project. We will switch to something more specific later.
-if ! lxc info | grep "project:" | grep -q default; then
-    lxc project switch default
-fi
-
-DOMAIN_NAME=
 RUN_CERT_RENEWAL=true
 SKIP_WWW=false
 RESTORE_WWW=false
 RESTORE_CERTS=false
-BACKUP_CERTS=true
-BACKUP_APPS=true
-BACKUP_BTCPAY=true
+BACKUP_CERTS=false
+BACKUP_BTCPAY=false
+BACKUP_CERTS=false
+BACKUP_APPS=false
+BACKUP_BTCPAY=false
 BACKUP_BTCPAY_ARCHIVE_PATH=
 RESTORE_BTCPAY=false
 SKIP_BTCPAY=false
 UPDATE_BTCPAY=false
-RECONFIGURE_BTCPAY_SERVER=false
 REMOTE_NAME="$(lxc remote get-default)"
 STOP_SERVICES=false
 USER_SAYS_YES=false
 RESTART_FRONT_END=true
-USER_TARGET_PROJECT=
 
 # grab any modifications from the command line.
 for i in "$@"; do
@@ -69,39 +63,31 @@ for i in "$@"; do
         --restore-www)
             RESTORE_WWW=true
             RESTORE_CERTS=true
-            BACKUP_APPS=false
-            RUN_CERT_RENEWAL=false
-            RESTART_FRONT_END=true
+
             shift
         ;;
         --restore-btcpay)
             RESTORE_BTCPAY=true
-            BACKUP_BTCPAY=false
-            RUN_CERT_RENEWAL=false
             shift
         ;;
-        --no-backup-www)
-            BACKUP_CERTS=false
-            BACKUP_APPS=false
+        --backup-www)
+            BACKUP_CERTS=true
+            BACKUP_APPS=true
+            shift
+        ;;
+        --backup-btcpayserver)
+            BACKUP_BTCPAY=true
             shift
         ;;
         --stop)
             STOP_SERVICES=true
-            RESTART_FRONT_END=true
-            shift
-        ;;
-        --restart-front-end)
-            RESTART_FRONT_END=true
+            RESTART_FRONT_END=false
             shift
         ;;
         --backup-archive-path=*)
             BACKUP_BTCPAY_ARCHIVE_PATH="${i#*=}"
             shift
         ;;
-        --project=*)
-            USER_TARGET_PROJECT="${i#*=}"
-            shift
-        ;;
         --update-btcpay)
             UPDATE_BTCPAY=true
             shift
@@ -110,7 +96,7 @@ for i in "$@"; do
             SKIP_WWW=true
             shift
         ;;
-        --skip-btcpay)
+        --skip-btcpayserver)
             SKIP_BTCPAY=true
             shift
         ;;
@@ -118,10 +104,6 @@ for i in "$@"; do
             RUN_CERT_RENEWAL=false
             shift
         ;;
-        --reconfigure-btcpay)
-            RECONFIGURE_BTCPAY_SERVER=true
-            shift
-        ;;
         -y)
             USER_SAYS_YES=true
             shift
@@ -146,7 +128,8 @@ fi
 # set up our default paths.
 source ../../defaults.sh
 
-export DOMAIN_NAME="$DOMAIN_NAME"
+. ../remote_env.sh
+
 export REGISTRY_DOCKER_IMAGE="registry:2"
 export RESTORE_WWW="$RESTORE_WWW"
 export STOP_SERVICES="$STOP_SERVICES"
@@ -156,7 +139,7 @@ export RESTORE_BTCPAY="$RESTORE_BTCPAY"
 export BACKUP_BTCPAY="$BACKUP_BTCPAY"
 export RUN_CERT_RENEWAL="$RUN_CERT_RENEWAL"
 export REMOTE_NAME="$REMOTE_NAME"
-export REMOTE_PATH="$REMOTES_DIR/$REMOTE_NAME"
+export REMOTE_PATH="$REMOTES_PATH/$REMOTE_NAME"
 export USER_SAYS_YES="$USER_SAYS_YES"
 export BACKUP_BTCPAY_ARCHIVE_PATH="$BACKUP_BTCPAY_ARCHIVE_PATH"
 export RESTART_FRONT_END="$RESTART_FRONT_END"
@@ -215,6 +198,7 @@ DUPLICITY_BACKUP_PASSPHRASE="$(new_pass)"
 DEPLOY_GHOST=true
 DEPLOY_CLAMS=false
 DEPLOY_NEXTCLOUD=false
+DEPLOY_NOSTR=false
 NOSTR_ACCOUNT_PUBKEY=
 DEPLOY_GITEA=false
 GHOST_MYSQL_PASSWORD="$(new_pass)"
@@ -235,26 +219,9 @@ EOL
 
 }
 
-for PROJECT_CHAIN in ${DEPLOYMENT_STRING//,/ }; do
-    NO_PARENS="${PROJECT_CHAIN:1:${#PROJECT_CHAIN}-2}"
-    PROJECT_PREFIX=$(echo "$NO_PARENS" | cut -d'|' -f1)
-    BITCOIN_CHAIN=$(echo "$NO_PARENS" | cut -d'|' -f2)
-    export PROJECT_PREFIX="$PROJECT_PREFIX"
-    export BITCOIN_CHAIN="$BITCOIN_CHAIN"
-
-    PROJECT_NAME="$PROJECT_PREFIX-$BITCOIN_CHAIN"
-    PROJECT_PATH="$PROJECTS_DIR/$PROJECT_NAME"
-    
-    # if the user sets USER_TARGET_PROJECT, let's ensure the project exists.
-    if [ -n "$USER_TARGET_PROJECT" ]; then
-
-        if [ "$PROJECT_NAME" != "$USER_TARGET_PROJECT" ]; then
-            continue
-        fi
-    fi
-
+PROJECT_NAME="$(lxc info | grep "project:" | awk '{print $2}')"
 export PROJECT_NAME="$PROJECT_NAME"
-    export PROJECT_PATH="$PROJECT_PATH"
+export PROJECT_PATH="$PROJECTS_PATH/$PROJECT_NAME"
 
 mkdir -p "$PROJECT_PATH" "$REMOTE_PATH/projects"
 
@@ -275,6 +242,7 @@ PRIMARY_DOMAIN="domain0.tld"
 # OTHER_SITES_LIST="domain1.tld,domain2.tld,domain3.tld"
 
 WWW_SERVER_MAC_ADDRESS=
+# WWW_SSDATA_DISK_SIZE_GB=100
 # WWW_SERVER_CPU_COUNT="6"
 # WWW_SERVER_MEMORY_MB="4096"
 
@@ -291,8 +259,7 @@ EOL
     exit 1
 fi
 
-    # source project defition.
-    source "$PROJECT_DEFINITION_PATH"
+. ../project_env.sh
 
 if [ -z "$PRIMARY_DOMAIN" ]; then
     echo "ERROR: The PRIMARY_DOMAIN is not specified. Check your project.conf."
@@ -325,12 +292,14 @@ EOL
 export SITE_PATH="$SITES_PATH/$DOMAIN_NAME"
 export PRIMARY_WWW_FQDN="$WWW_HOSTNAME.$DOMAIN_NAME"
 
+
+
+
 stub_site_definition
 
 # bring the VMs up under the primary domain name.
 
 export UPDATE_BTCPAY="$UPDATE_BTCPAY"
-    export RECONFIGURE_BTCPAY_SERVER="$RECONFIGURE_BTCPAY_SERVER"
 
 # iterate over all our server endpoints and provision them if needed.
 # www
@@ -342,6 +311,16 @@ EOL
 fi
 
 for VIRTUAL_MACHINE in www btcpayserver; do
+
+    if [ "$VIRTUAL_MACHINE" = btcpayserver ] && [ "$SKIP_BTCPAY" = true ]; then
+        continue
+    fi
+
+    if [ "$VIRTUAL_MACHINE" = www ] && [ "$SKIP_WWW" = true ]; then
+        continue
+    fi
+
+
     export VIRTUAL_MACHINE="$VIRTUAL_MACHINE"
     FQDN=
 
@@ -356,12 +335,6 @@ EOL
         exit 1
     fi
 
-        # create the lxc project as specified by PROJECT_NAME
-        if ! lxc project list | grep -q "$PROJECT_NAME"; then
-            lxc project create "$PROJECT_NAME"
-            lxc project set "$PROJECT_NAME" features.networks=true features.images=false features.storage.volumes=false
-        fi
-
     # Goal is to get the macvlan interface.
     LXD_SS_CONFIG_LINE=
     if lxc network list --format csv --project=default | grep lxdbr0 | grep -q "ss-config"; then
@@ -380,7 +353,6 @@ EOL
 
     # Now let's switch to the new project to ensure new resources are created under the project scope.
     if ! lxc info | grep "project:" | grep -q "$PROJECT_NAME"; then
-            echo "INFO: switch to lxd project '$PROJECT_NAME'."
         lxc project switch "$PROJECT_NAME"
     fi
 
@@ -402,29 +374,24 @@ EOL
         FQDN="$WWW_HOSTNAME.$DOMAIN_NAME"
         VPS_HOSTNAME="$WWW_HOSTNAME"
         MAC_ADDRESS_TO_PROVISION="$WWW_SERVER_MAC_ADDRESS"
-            ROOT_DISK_SIZE_GB="$((ROOT_DISK_SIZE_GB + NEXTCLOUD_SPACE_GB))"
 
     elif [ "$VIRTUAL_MACHINE" = btcpayserver ] || [ "$SKIP_BTCPAY" = true ]; then
         FQDN="$BTCPAY_HOSTNAME.$DOMAIN_NAME"
         VPS_HOSTNAME="$BTCPAY_HOSTNAME"
         MAC_ADDRESS_TO_PROVISION="$BTCPAYSERVER_MAC_ADDRESS"
-            if [ "$BITCOIN_CHAIN" = mainnet ]; then
-                ROOT_DISK_SIZE_GB=150
-            elif [ "$BITCOIN_CHAIN" = testnet ]; then
-                ROOT_DISK_SIZE_GB=70
-            fi
 
     elif [ "$VIRTUAL_MACHINE" = "$BASE_IMAGE_VM_NAME" ]; then
         export FQDN="$BASE_IMAGE_VM_NAME"
-            ROOT_DISK_SIZE_GB=8
     else
         echo "ERROR: VIRTUAL_MACHINE not within allowable bounds."
         exit
     fi
 
+
+
+
     export FQDN="$FQDN"
     export LXD_VM_NAME="${FQDN//./-}"
-        export REMOTE_CERT_DIR="$REMOTE_CERT_BASE_DIR/$FQDN"
     export MAC_ADDRESS_TO_PROVISION="$MAC_ADDRESS_TO_PROVISION"
     export PROJECT_PATH="$PROJECT_PATH"
 
@@ -456,6 +423,8 @@ EOL
 if [ "$SKIP_WWW" = false ]; then
     ./www/go.sh
     ssh ubuntu@"$PRIMARY_WWW_FQDN" "echo $LATEST_GIT_COMMIT > /home/ubuntu/.ss-githead"
+else
+    echo "INFO: Skipping www VM."
 fi
 
 export DOMAIN_NAME="$PRIMARY_DOMAIN"
@@ -464,6 +433,6 @@ EOL
     ./btcpayserver/go.sh
 
     ssh ubuntu@"$BTCPAY_FQDN" "echo $LATEST_GIT_COMMIT > /home/ubuntu/.ss-githead"
+else
+    echo "INFO: Skipping the btcpayserver VM."
 fi
-
-done

deploy_vm.sh

@@ -30,7 +30,51 @@ if ! lxc list --format csv | grep -q "$LXD_VM_NAME"; then
         exit 1
     fi
 
-    bash -c "./stub_lxc_profile.sh --vm=$VIRTUAL_MACHINE --lxd-hostname=$LXD_VM_NAME"
+    # TODO ensure we are only GROWING the volume--never shrinking per zfs volume docs.
+    VM_ID=
+    BACKUP_DISK_SIZE_GB=
+    SSDATA_DISK_SIZE_GB=
+    DOCKER_DISK_SIZE_GB=
+    if [ "$VIRTUAL_MACHINE" = www ]; then
+        VM_ID="w"
+        BACKUP_DISK_SIZE_GB="$WWW_BACKUP_DISK_SIZE_GB"
+        SSDATA_DISK_SIZE_GB="$WWW_SSDATA_DISK_SIZE_GB"
+        DOCKER_DISK_SIZE_GB="$WWW_DOCKER_DISK_SIZE_GB"
+    fi
+
+    if [ "$VIRTUAL_MACHINE" = btcpayserver ]; then
+        VM_ID="b"
+        BACKUP_DISK_SIZE_GB="$BTCPAYSERVER_BACKUP_DISK_SIZE_GB"
+        SSDATA_DISK_SIZE_GB="$BTCPAYSERVER_SSDATA_DISK_SIZE_GB"
+        DOCKER_DISK_SIZE_GB="$BTCPAYSERVER_DOCKER_DISK_SIZE_GB"
+    fi
+    
+    DOCKER_VOLUME_NAME="$PRIMARY_DOMAIN_IDENTIFIER-$VM_ID""d"
+    if ! lxc storage volume list ss-base | grep -q "$DOCKER_VOLUME_NAME"; then
+        lxc storage volume create ss-base "$DOCKER_VOLUME_NAME" --type=block
+    fi
+
+    # TODO ensure we are only GROWING the volume--never shrinking
+    lxc storage volume set ss-base "$DOCKER_VOLUME_NAME" size="${DOCKER_DISK_SIZE_GB}GB"
+
+    SSDATA_VOLUME_NAME="$PRIMARY_DOMAIN_IDENTIFIER-$VM_ID""s"
+    if ! lxc storage volume list ss-base | grep -q "$SSDATA_VOLUME_NAME"; then
+        lxc storage volume create ss-base "$SSDATA_VOLUME_NAME" --type=filesystem
+    fi
+
+    # TODO ensure we are only GROWING the volume--never shrinking per zfs volume docs.
+    lxc storage volume set ss-base "$SSDATA_VOLUME_NAME" size="${SSDATA_DISK_SIZE_GB}GB"
+
+
+    BACKUP_VOLUME_NAME="$PRIMARY_DOMAIN_IDENTIFIER-$VM_ID""b"
+    if ! lxc storage volume list ss-base | grep -q "$BACKUP_VOLUME_NAME"; then
+        lxc storage volume create ss-base "$BACKUP_VOLUME_NAME" --type=filesystem
+    fi
+
+    lxc storage volume set ss-base "$BACKUP_VOLUME_NAME" size="${BACKUP_DISK_SIZE_GB}GB"
+
+
+    bash -c "./stub_lxc_profile.sh --vm=$VIRTUAL_MACHINE --lxd-hostname=$LXD_VM_NAME --ss-volume-name=$SSDATA_VOLUME_NAME --backup-volume-name=$BACKUP_VOLUME_NAME"
 
     # now let's create a new VM to work with.
     #lxc init --profile="$LXD_VM_NAME" "$BASE_IMAGE_VM_NAME" "$LXD_VM_NAME" --vm
@@ -39,7 +83,9 @@ if ! lxc list --format csv | grep -q "$LXD_VM_NAME"; then
     # let's PIN the HW address for now so we don't exhaust IP
     # and so we can set DNS internally.
     lxc config set "$LXD_VM_NAME" "volatile.enp5s0.hwaddr=$MAC_ADDRESS_TO_PROVISION"
-    lxc config device override "$LXD_VM_NAME" root size="${ROOT_DISK_SIZE_GB}GB"
+
+    # attack the docker block device.
+    lxc storage volume attach ss-base "$DOCKER_VOLUME_NAME" "$LXD_VM_NAME"
 
     # if [ "$VIRTUAL_MACHINE" = btcpayserver ]; then
     #     # attach any volumes
@@ -55,10 +101,17 @@ if ! lxc list --format csv | grep -q "$LXD_VM_NAME"; then
     sleep 10
 
     bash -c "./wait_for_lxc_ip.sh --lxd-name=$LXD_VM_NAME"
-fi
 
     # scan the remote machine and install it's identity in our SSH known_hosts file.
     ssh-keyscan -H -t ecdsa "$FQDN" >> "$SSH_HOME/known_hosts"
 
-# create a directory to store backup archives. This is on all new vms.
-ssh "$FQDN" mkdir -p "$REMOTE_HOME/backups"
+    ssh "$FQDN" "sudo chown ubuntu:ubuntu $REMOTE_DATA_PATH"
+    ssh "$FQDN" "sudo chown -R ubuntu:ubuntu $REMOTE_BACKUP_PATH"
+
+    if [ "$VIRTUAL_MACHINE" = btcpayserver ]; then
+        # send an updated ~/.bashrc so we have quicker access to cli tools
+        scp ./btcpayserver/bashrc.txt "ubuntu@$FQDN:$REMOTE_HOME/.bashrc"
+        ssh "$BTCPAY_FQDN" "chown ubuntu:ubuntu $REMOTE_HOME/.bashrc"
+        ssh "$BTCPAY_FQDN" "chmod 0664 $REMOTE_HOME/.bashrc"
+    fi
+fi

domain_env.sh

@@ -11,8 +11,10 @@ export NOSTR_FQDN="$NOSTR_HOSTNAME.$DOMAIN_NAME"
 export CLAMS_FQDN="$CLAMS_HOSTNAME.$DOMAIN_NAME"
 export ADMIN_ACCOUNT_USERNAME="info"
 export CERTIFICATE_EMAIL_ADDRESS="$ADMIN_ACCOUNT_USERNAME@$DOMAIN_NAME"
-export REMOTE_NEXTCLOUD_PATH="$REMOTE_HOME/nextcloud"
-export REMOTE_GITEA_PATH="$REMOTE_HOME/gitea"
+export REMOTE_GHOST_PATH="$REMOTE_DATA_PATH/ghost"
+export REMOTE_NEXTCLOUD_PATH="$REMOTE_DATA_PATH/nextcloud"
+export REMOTE_GITEA_PATH="$REMOTE_DATA_PATH/gitea"
+export REMOTE_CLAMS_PATH="$REMOTE_DATA_PATH/clams"
 export BTCPAY_ADDITIONAL_HOSTNAMES="$BTCPAY_ADDITIONAL_HOSTNAMES"
 
 

stub_lxc_profile.sh

@@ -5,6 +5,8 @@ cd "$(dirname "$0")"
 
 VIRTUAL_MACHINE=base
 LXD_HOSTNAME=
+SSDATA_VOLUME_NAME=
+BACKUP_VOLUME_NAME=
 
 # grab any modifications from the command line.
 for i in "$@"; do
@@ -17,6 +19,14 @@ for i in "$@"; do
             VIRTUAL_MACHINE="${i#*=}"
             shift
         ;;
+        --ss-volume-name=*)
+            SSDATA_VOLUME_NAME="${i#*=}"
+            shift
+        ;;
+        --backup-volume-name=*)
+            BACKUP_VOLUME_NAME="${i#*=}"
+            shift
+        ;;
         *)
         echo "Unexpected option: $1"
         exit 1
@@ -131,7 +141,9 @@ EOF
 
     fi
 
+fi
 
+if [ "$VIRTUAL_MACHINE" = base ]; then
     cat >> "$YAML_PATH" <<EOF
     runcmd:
       - sudo mkdir -m 0755 -p /etc/apt/keyrings
@@ -140,44 +152,12 @@ EOF
       - sudo apt-get update
       - sudo apt-get install -y docker-ce docker-ce-cli containerd.io docker-buildx-plugin docker-compose-plugin
       - sudo DEBIAN_FRONTEND=noninteractive apt-get install -y openssh-server
-      - sudo chown -R ubuntu:ubuntu /home/ubuntu/
 
 EOF
 
+fi
 
-    # write_files:
-    #   - path: /etc/ssh/sshd_config
-    #     content: |
-    #           Port 22
-    #           ListenAddress 0.0.0.0
-    #           Protocol 2
-    #           ChallengeResponseAuthentication no
-    #           PasswordAuthentication no
-    #           UsePAM no
-    #           LogLevel INFO
-
-
-    #   - path: /etc/docker/daemon.json
-    #     content: |
-    #           {
-    #             "registry-mirrors": "${REGISTRY_URL}",
-    #             "labels": "githead=${LATEST_GIT_COMMIT}"
-    #           }
-                #"labels": [githead="${LATEST_GIT_COMMIT}"]
-
-    # apt:
-    #   sources:
-    #     docker.list:
-    #       source: "deb [arch=amd64] https://download.docker.com/linux/ubuntu ${LXD_UBUNTU_BASE_VERSION} stable"
-    #       keyid: 9DC858229FC7DD38854AE2D88D81803C0EBFCD88
-
-
-
-
-#      - sudo apt-get update
-      #- sudo apt-get install -y docker-ce docker-ce-cli containerd.io docker-buildx-plugin docker-compose-plugin
-
-else 
+if [ "$VIRTUAL_MACHINE" != base ]; then
     # all other machines that are not the base image
     cat >> "$YAML_PATH" <<EOF
   user.vendor-data: |
@@ -190,6 +170,30 @@ else
     preserve_hostname: true
     fqdn: ${FQDN}
 
+    resize_rootfs: false
+
+    disk_setup:
+      /dev/sdb:
+        table_type: 'gpt'
+        layout: true
+        overwrite: false
+
+    fs_setup:
+      - label: docker-data
+        filesystem: 'ext4'
+        device: '/dev/sdb1'
+        overwrite: false
+
+    mounts:
+      - [ sdb, /var/lib/docker ]
+
+    mount_default_fields: [ None, None, "auto", "defaults,nofail", "0", "2" ]
+
+EOF
+fi
+
+if [ "$VIRTUAL_MACHINE" != base ]; then
+    cat >> "$YAML_PATH" <<EOF
   user.network-config: |
     version: 2
     ethernets:
@@ -204,7 +208,6 @@ else
       enp6s0:
         dhcp4: true
 
-
 EOF
 
 fi
@@ -222,6 +225,21 @@ devices:
     type: disk
 EOF
 
+if [ "$VIRTUAL_MACHINE" != base ]; then
+    cat >> "$YAML_PATH" <<EOF
+  ss-data:
+    path: ${REMOTE_DATA_PATH}
+    pool: ss-base
+    source: ${SSDATA_VOLUME_NAME}
+    type: disk
+  ss-backup:
+    path: ${REMOTE_BACKUP_PATH}
+    pool: ss-base
+    source: ${BACKUP_VOLUME_NAME}
+    type: disk
+EOF
+fi
+
 # Stub out the network piece for the base image.
 if [ "$VIRTUAL_MACHINE" = base ]; then
     cat >> "$YAML_PATH" <<EOF
@@ -250,9 +268,19 @@ EOF
 fi
 
 # let's create a profile for the BCM TYPE-1 VMs. This is per VM.
+if [ "$VIRTUAL_MACHINE" = base ]; then
+    if ! lxc profile list --format csv --project default | grep -q "$LXD_HOSTNAME"; then
+        lxc profile create "$LXD_HOSTNAME" --project default
+    fi
+
+    # configure the profile with our generated cloud-init.yml file.
+    cat "$YAML_PATH" | lxc profile edit "$LXD_HOSTNAME" --project default
+else
     if ! lxc profile list --format csv | grep -q "$LXD_HOSTNAME"; then
         lxc profile create "$LXD_HOSTNAME"
     fi
 
     # configure the profile with our generated cloud-init.yml file.
     cat "$YAML_PATH" | lxc profile edit "$LXD_HOSTNAME"
+fi
+

www/generate_certs.sh

@@ -18,7 +18,7 @@ for DOMAIN_NAME in ${DOMAIN_LIST//,/ }; do
     # with the lxd side, we are trying to expose ALL OUR services from one IP address, which terminates
     # at a cachehing reverse proxy that runs nginx.
 
-    ssh "$PRIMARY_WWW_FQDN" sudo mkdir -p "$REMOTE_HOME/letsencrypt/$DOMAIN_NAME/_logs"
+    ssh "$PRIMARY_WWW_FQDN" sudo mkdir -p "$REMOTE_DATA_PATH_LETSENCRYPT/$DOMAIN_NAME/_logs"
 
     # this is minimum required; www and btcpay.
     DOMAIN_STRING="-d $DOMAIN_NAME -d $WWW_FQDN -d $BTCPAY_USER_FQDN"
@@ -26,7 +26,7 @@ for DOMAIN_NAME in ${DOMAIN_LIST//,/ }; do
     if [ "$DEPLOY_NEXTCLOUD" = true ]; then DOMAIN_STRING="$DOMAIN_STRING -d $NEXTCLOUD_FQDN"; fi
     if [ "$DEPLOY_GITEA" = true ]; then DOMAIN_STRING="$DOMAIN_STRING -d $GITEA_FQDN"; fi
     if [ "$DEPLOY_CLAMS" = true ]; then DOMAIN_STRING="$DOMAIN_STRING -d $CLAMS_FQDN"; fi
-    if [ -n "$NOSTR_ACCOUNT_PUBKEY" ]; then DOMAIN_STRING="$DOMAIN_STRING -d $NOSTR_FQDN"; fi
+    if [ "$DEPLOY_NOSTR" = true ]; then DOMAIN_STRING="$DOMAIN_STRING -d $NOSTR_FQDN"; fi
 
     
     # if BTCPAY_ALT_NAMES has been set by the admin, iterate over the list
@@ -38,7 +38,7 @@ for DOMAIN_NAME in ${DOMAIN_LIST//,/ }; do
         done
     fi
     
-    GENERATE_CERT_STRING="docker run -it --rm --name certbot -p 80:80 -p 443:443 -v $REMOTE_HOME/letsencrypt/$DOMAIN_NAME:/etc/letsencrypt -v /var/lib/letsencrypt:/var/lib/letsencrypt -v $REMOTE_HOME/letsencrypt/$DOMAIN_NAME/_logs:/var/log/letsencrypt certbot/certbot certonly -v --noninteractive --agree-tos --key-type ecdsa --standalone --expand ${DOMAIN_STRING} --email $CERTIFICATE_EMAIL_ADDRESS"
+    GENERATE_CERT_STRING="docker run -it --rm --name certbot -p 80:80 -p 443:443 -v $REMOTE_DATA_PATH_LETSENCRYPT/$DOMAIN_NAME:/etc/letsencrypt -v /var/lib/letsencrypt:/var/lib/letsencrypt -v $REMOTE_DATA_PATH_LETSENCRYPT/$DOMAIN_NAME/_logs:/var/log/letsencrypt certbot/certbot certonly -v --noninteractive --agree-tos --key-type ecdsa --standalone --expand ${DOMAIN_STRING} --email $CERTIFICATE_EMAIL_ADDRESS"
 
     # execute the certbot command that we dynamically generated.
     eval "$GENERATE_CERT_STRING"

www/go.sh

@@ -7,12 +7,10 @@ cd "$(dirname "$0")"
 DOCKER_HOST="ssh://ubuntu@$WWW_FQDN"
 export DOCKER_HOST="$DOCKER_HOST"
 
-# prepare clams images and such
-#./prepare_clams.sh
-
 # Create the nginx config file which covers all domainys.
 bash -c ./stub/nginx_config.sh
 
+BUILD_CLAMS=false
 for DOMAIN_NAME in ${DOMAIN_LIST//,/ }; do
     export DOMAIN_NAME="$DOMAIN_NAME"
     export SITE_PATH="$SITES_PATH/$DOMAIN_NAME"
@@ -22,6 +20,10 @@ for DOMAIN_NAME in ${DOMAIN_LIST//,/ }; do
     source "$SITE_PATH/site.conf"
     source ../domain_env.sh
 
+    if [ "$DEPLOY_CLAMS" = true ]; then
+        BUILD_CLAMS=true
+    fi
+
     ### Let's check to ensure all the requiredsettings are set.
     if [ "$DEPLOY_GHOST" = true ]; then
         if [ -z "$GHOST_MYSQL_PASSWORD" ]; then
@@ -58,6 +60,15 @@ for DOMAIN_NAME in ${DOMAIN_LIST//,/ }; do
         fi
     fi
 
+
+    if [ "$DEPLOY_NOSTR" = true ]; then
+        if [ -z "$NOSTR_ACCOUNT_PUBKEY" ]; then
+            echo "ERROR: When deploying nostr, you MUST specify NOSTR_ACCOUNT_PUBKEY."
+            exit 1
+        fi
+    fi
+
+
     if [ -z "$DUPLICITY_BACKUP_PASSPHRASE" ]; then
         echo "ERROR: Ensure DUPLICITY_BACKUP_PASSPHRASE is configured in your site.conf."
         exit 1
@@ -72,7 +83,6 @@ done
 
 ./stop_docker_stacks.sh
 
-
 # TODO check if there are any other stacks that are left running (other than reverse proxy)
 # if so, this may mean the user has disabled one or more domains and that existing sites/services
 # are still running. We should prompt the user of this and quit. They have to go manually docker stack remove these.
@@ -82,20 +92,8 @@ if [[ $(docker stack list | wc -l) -gt 2 ]]; then
     exit 1
 fi
 
-
-
 # ok, the backend stacks are stopped.
 if [ "$RESTART_FRONT_END" = true ]; then
-    # remove the nginx stack
-    if docker stack list --format "{{.Name}}" | grep -q reverse-proxy; then
-        sleep 2
-
-        docker stack rm reverse-proxy
-
-        # wait for all docker containers to stop.
-        # TODO see if there's a way to check for this.
-        sleep 20
-    fi
 
     # generate the certs and grab a backup
     if [ "$RUN_CERT_RENEWAL" = true ] && [ "$RESTORE_CERTS" = false ]; then
@@ -116,8 +114,8 @@ if [ "$RESTART_FRONT_END" = true ]; then
         source ../domain_env.sh
 
         # these variable are used by both backup/restore scripts.
-        export REMOTE_BACKUP_PATH="$REMOTE_HOME/backups/www/$APP/$DOMAIN_IDENTIFIER"
-        export REMOTE_SOURCE_BACKUP_PATH="$REMOTE_HOME/$APP/$DOMAIN_NAME"
+        export REMOTE_BACKUP_PATH="$REMOTE_BACKUP_PATH/www/$APP/$DOMAIN_IDENTIFIER"
+        export REMOTE_SOURCE_BACKUP_PATH="$REMOTE_DATA_PATH/$APP/$DOMAIN_NAME"
 
         # ensure our local backup path exists so we can pull down the duplicity archive to the management machine.
         export LOCAL_BACKUP_PATH="$SITE_PATH/backups/www/$APP"
@@ -130,6 +128,13 @@ if [ "$RESTART_FRONT_END" = true ]; then
             ./backup_path.sh
         fi
     done
+else
+    exit 0
+fi
+
+# build the clams docker image 
+if [ "$BUILD_CLAMS" = true ]; then
+    ./clams/build.sh
 fi
 
 # nginx gets deployed first since it "owns" the docker networks of downstream services.
@@ -141,6 +146,8 @@ fi
 ./stub/gitea_yml.sh
 ./stub/nostr_yml.sh
 
+
+
 # # start a browser session; point it to port 80 to ensure HTTPS redirect.
 # # WWW_FQDN is in our certificate, so we resolve to that.
 # wait-for-it -t 320 "$WWW_FQDN:80"

www/prepare_clams.sh

@@ -1,35 +0,0 @@
-#!/bin/bash
-
-set -e
-cd "$(dirname "$0")"
-
-# deploy clams wallet.
-LOCAL_CLAMS_REPO_PATH="$(pwd)/clams"
-CLAMS_APP_DOCKER_REPO_URL="https://github.com/farscapian/clams-app-docker"
-if [ ! -d "$LOCAL_CLAMS_REPO_PATH" ]; then
-    git clone "$CLAMS_APP_DOCKER_REPO_URL" "$LOCAL_CLAMS_REPO_PATH"
-else
-    cd "$LOCAL_CLAMS_REPO_PATH"
-    git config --global pull.rebase false
-    git pull
-    cd -
-fi
-
-# lxc file push -r -p "$LOCAL_CLAMS_REPO_PATH" "${PRIMARY_WWW_FQDN//./-}$REMOTE_HOME"
-BROWSER_APP_GIT_TAG="1.5.0"
-BROWSER_APP_GIT_REPO_URL="https://github.com/clams-tech/browser-app"
-BROWSER_APP_IMAGE_NAME="browser-app:$BROWSER_APP_GIT_TAG"
-
-# build the browser-app image.
-if ! docker image list --format "{{.Repository}}:{{.Tag}}" | grep -q "$BROWSER_APP_IMAGE_NAME"; then
-    docker build --build-arg GIT_REPO_URL="$BROWSER_APP_GIT_REPO_URL" \
-    --build-arg VERSION="$BROWSER_APP_GIT_TAG" \
-    -t "$BROWSER_APP_IMAGE_NAME" \
-    "$(pwd)/clams/frontend/browser-app/"
-fi
-
-# If the clams-root volume doesn't exist, we create and seed it.
-if ! docker volume list | grep -q clams-root; then
-    docker volume create clams-root
-    docker run -t --rm -v clams-root:/output --name browser-app "$BROWSER_APP_IMAGE_NAME"
-fi

www/restore_path.sh

@@ -37,4 +37,4 @@ scp -r "$LOCAL_BACKUP_PATH" "$PRIMARY_WWW_FQDN:$REMOTE_BACKUP_PATH"
 ssh "$PRIMARY_WWW_FQDN" sudo PASSPHRASE="$DUPLICITY_BACKUP_PASSPHRASE" duplicity --force restore "file://$REMOTE_BACKUP_PATH/$APP" "$REMOTE_SOURCE_BACKUP_PATH/"
 
 # reset folder owner to ubuntu
-ssh "$PRIMARY_WWW_FQDN" sudo chown ubuntu:ubuntu "$REMOTE_HOME/$APP"
+ssh "$PRIMARY_WWW_FQDN" sudo chown ubuntu:ubuntu "$REMOTE_DATA_PATH/$APP"

www/stop_docker_stacks.sh

@@ -26,8 +26,8 @@ for DOMAIN_NAME in ${DOMAIN_LIST//,/ }; do
 
             # these variable are used by both backup/restore scripts.
             export APP="$APP"
-            export REMOTE_BACKUP_PATH="$REMOTE_HOME/backups/www/$APP/$DOMAIN_IDENTIFIER-$LANGUAGE_CODE"
-            export REMOTE_SOURCE_BACKUP_PATH="$REMOTE_HOME/$APP/$DOMAIN_NAME"
+            export REMOTE_BACKUP_PATH="$REMOTE_BACKUP_PATH/www/$APP/$DOMAIN_IDENTIFIER-$LANGUAGE_CODE"
+            export REMOTE_SOURCE_BACKUP_PATH="$REMOTE_DATA_PATH/$APP/$DOMAIN_NAME"
   
             # ensure our local backup path exists so we can pull down the duplicity archive to the management machine.
             export LOCAL_BACKUP_PATH="$SITE_PATH/backups/www/$APP"
@@ -39,11 +39,19 @@ for DOMAIN_NAME in ${DOMAIN_LIST//,/ }; do
 
             if [ "$RESTORE_WWW" = true ]; then
                 ./restore_path.sh
-                #ssh "$PRIMARY_WWW_FQDN" sudo chown ubuntu:ubuntu "$REMOTE_HOME/$APP"
-            elif [ "$BACKUP_APPS"  = true ]; then
+            fi
+            
+            if [ "$BACKUP_APPS" = true ]; then
                 # if we're not restoring, then we may or may not back up.
                 ./backup_path.sh
             fi
         done
     done
 done
+
+# remove the nginx stack
+if docker stack list --format "{{.Name}}" | grep -q reverse-proxy; then
+    docker stack rm reverse-proxy
+
+    sleep 5
+fi

www/stub/ghost_yml.sh

@@ -3,6 +3,7 @@
 set -eu
 cd "$(dirname "$0")"
 
+DEPLOY_STACK=false
 for DOMAIN_NAME in ${DOMAIN_LIST//,/ }; do
     export DOMAIN_NAME="$DOMAIN_NAME"
     export SITE_PATH="$SITES_PATH/$DOMAIN_NAME"
@@ -12,6 +13,10 @@ for DOMAIN_NAME in ${DOMAIN_LIST//,/ }; do
     source "$SITE_PATH/site.conf"
     source ../../domain_env.sh
 
+    if [ "$DEPLOY_GHOST" = true ]; then
+        DEPLOY_STACK=true
+    fi
+
     # for each language specified in the site.conf, we spawn a separate ghost container
     # at https://www.domain.com/$LANGUAGE_CODE
     for LANGUAGE_CODE in ${SITE_LANGUAGE_CODES//,/ }; do
@@ -19,8 +24,8 @@ for DOMAIN_NAME in ${DOMAIN_LIST//,/ }; do
         STACK_NAME="$DOMAIN_IDENTIFIER-$LANGUAGE_CODE"
 
         # ensure directories on remote host exist so we can mount them into the containers.
-        ssh "$PRIMARY_WWW_FQDN" mkdir -p "$REMOTE_HOME/ghost/$DOMAIN_NAME"
-        ssh "$PRIMARY_WWW_FQDN" mkdir -p "$REMOTE_HOME/ghost/$DOMAIN_NAME/$LANGUAGE_CODE/ghost" "$REMOTE_HOME/ghost/$DOMAIN_NAME/$LANGUAGE_CODE/db"
+        ssh "$PRIMARY_WWW_FQDN" mkdir -p "$REMOTE_GHOST_PATH/$DOMAIN_NAME"
+        ssh "$PRIMARY_WWW_FQDN" mkdir -p "$REMOTE_GHOST_PATH/$DOMAIN_NAME/$LANGUAGE_CODE/ghost" "$REMOTE_GHOST_PATH/$DOMAIN_NAME/$LANGUAGE_CODE/db"
 
         export GHOST_STACK_TAG="ghost-$STACK_NAME"
         export GHOST_DB_STACK_TAG="ghostdb-$STACK_NAME"
@@ -44,7 +49,7 @@ EOL
       - ghostnet-${DOMAIN_IDENTIFIER}-${LANGUAGE_CODE}
       - ghostdbnet-${DOMAIN_IDENTIFIER}-${LANGUAGE_CODE}
     volumes:
-      - ${REMOTE_HOME}/ghost/${DOMAIN_NAME}/${LANGUAGE_CODE}/ghost:/var/lib/ghost/content
+      - ${REMOTE_GHOST_PATH}/${DOMAIN_NAME}/${LANGUAGE_CODE}/ghost:/var/lib/ghost/content
     environment:
 EOL
             if [ "$LANGUAGE_CODE" = "en" ]; then
@@ -74,7 +79,7 @@ EOL
     networks:
       - ghostdbnet-${DOMAIN_IDENTIFIER}-${LANGUAGE_CODE}
     volumes:
-      - ${REMOTE_HOME}/ghost/${DOMAIN_NAME}/${LANGUAGE_CODE}/db:/var/lib/mysql
+      - ${REMOTE_GHOST_PATH}/${DOMAIN_NAME}/${LANGUAGE_CODE}/db:/var/lib/mysql
     environment:
        - MYSQL_ROOT_PASSWORD=\${GHOST_MYSQL_ROOT_PASSWORD}
        - MYSQL_DATABASE=ghost
@@ -103,7 +108,7 @@ EOL
 EOL
             fi
 
-        if [ "$STOP_SERVICES" = false ]; then
+        if [ "$DEPLOY_STACK" = true ] && [ "$STOP_SERVICES" = false ]; then
             docker stack deploy -c "$DOCKER_YAML_PATH" "$DOMAIN_IDENTIFIER-ghost-$LANGUAGE_CODE"
             sleep 2
         fi

www/stub/nextcloud_yml.sh

@@ -35,7 +35,7 @@ services:
       - nextcloud-${DOMAIN_IDENTIFIER}-en
       - nextclouddb-${DOMAIN_IDENTIFIER}-en
     volumes:
-      - ${REMOTE_HOME}/nextcloud/${DOMAIN_NAME}/en/html:/var/www/html
+      - ${REMOTE_DATA_PATH}/nextcloud/${DOMAIN_NAME}/en/html:/var/www/html
     environment:
       - MYSQL_PASSWORD=\${NEXTCLOUD_MYSQL_PASSWORD}
       - MYSQL_DATABASE=nextcloud
@@ -55,7 +55,7 @@ services:
     networks:
       - nextclouddb-${DOMAIN_IDENTIFIER}-en
     volumes:
-      - ${REMOTE_HOME}/nextcloud/${DOMAIN_NAME}/en/db:/var/lib/mysql
+      - ${REMOTE_DATA_PATH}/nextcloud/${DOMAIN_NAME}/en/db:/var/lib/mysql
     environment:
        - MARIADB_ROOT_PASSWORD=\${NEXTCLOUD_MYSQL_ROOT_PASSWORD}
        - MYSQL_PASSWORD=\${NEXTCLOUD_MYSQL_PASSWORD}

www/stub/nginx_config.sh

@@ -31,6 +31,8 @@ events {
 http {
     client_max_body_size 100m;
     server_tokens off;
+    sendfile on;
+    include mime.types;
     
     # next two sets commands and connection_upgrade block come from https://docs.btcpayserver.org/FAQ/Deployment/#can-i-use-an-existing-nginx-server-as-a-reverse-proxy-with-ssl-termination
     # Needed to allow very long URLs to prevent issues while signing PSBTs
@@ -56,6 +58,24 @@ http {
 EOL
     fi
 
+
+    if [ "$DEPLOY_CLAMS" = true ]; then
+        # clams-browser-app server
+        cat >>"$NGINX_CONF_PATH" <<EOL
+    # https server block for https://${CLAMS_FQDN}
+    server {
+         listen 80;
+         server_name ${CLAMS_FQDN};
+
+         location / {
+             return 301 https://${CLAMS_FQDN}\$request_uri;
+         }
+    }
+
+EOL
+    fi
+
+
     # ghost http to https redirects.
     cat >>"$NGINX_CONF_PATH" <<EOL
     # http://${DOMAIN_NAME} redirect to https://${WWW_FQDN}
@@ -180,7 +200,7 @@ EOL
         
 EOL
 
-    if [ -n "$NOSTR_ACCOUNT_PUBKEY" ]; then
+    if [ "$DEPLOY_NOSTR" = true ]; then
         cat >>"$NGINX_CONF_PATH" <<EOL
         # We return a JSON object with name/pubkey mapping per NIP05.
         # https://www.reddit.com/r/nostr/comments/rrzk76/nip05_mapping_usernames_to_dns_domains_by_fiatjaf/sssss
@@ -207,7 +227,7 @@ EOL
 
 EOL
 
-    if [ -n "$NOSTR_ACCOUNT_PUBKEY" ]; then
+    if [ "$DEPLOY_NOSTR" = true ]; then
         cat >>"$NGINX_CONF_PATH" <<EOL
     # wss://$NOSTR_FQDN server block
     server {
@@ -263,36 +283,32 @@ EOL
 
 EOL
 
-    # Clams server entry
+    if [ "$DEPLOY_CLAMS" = true ]; then
+        # clams-browser-app server
+        cat >>"$NGINX_CONF_PATH" <<EOL
+    # https server block for https://${CLAMS_FQDN}
+    server {
+        listen 443 ssl;
 
-#     cat >>"$NGINX_CONF_PATH" <<EOL
-#     # https server block for https://${CLAMS_FQDN}
-#     server {
-#         listen 443 ssl http2;
+        ssl_certificate $CONTAINER_TLS_PATH/fullchain.pem;
+        ssl_certificate_key $CONTAINER_TLS_PATH/privkey.pem;
+        ssl_trusted_certificate $CONTAINER_TLS_PATH/fullchain.pem;
 
-#         ssl_certificate $CONTAINER_TLS_PATH/fullchain.pem;
-#         ssl_certificate_key $CONTAINER_TLS_PATH/privkey.pem;
-#         ssl_trusted_certificate $CONTAINER_TLS_PATH/fullchain.pem;
+        server_name ${CLAMS_FQDN};
 
-#         server_name ${CLAMS_FQDN};
-#         index index.js;
+        server_tokens off;
+        autoindex off;
+        gzip_static on;
 
-#         root  /apps/clams;
-#         index 200.htm;
+        root /browser-app;
+        index 200.html;
+    }
 
-#         location / {
-#             try_files \$uri \$uri/ /200.htm;
-#         }
+EOL
+    fi
 
-#         location ~* \.(?:css|js|jpg|svg)$ {
-#             expires 30d;
-#             add_header Cache-Control "public";
-#         }
-
-#     }
-
-# EOL
 
+    if [ "$DEPLOY_GHOST" = true ]; then
         echo "    # set up cache paths for nginx caching" >>"$NGINX_CONF_PATH"
         for LANGUAGE_CODE in ${SITE_LANGUAGE_CODES//,/ }; do
             STACK_NAME="$DOMAIN_IDENTIFIER-$LANGUAGE_CODE"
@@ -323,14 +339,6 @@ EOL
         
 EOL
 
-#     # add the Onion-Location header if specifed.
-#     if [ "$DEPLOY_ONION_SITE" = true ]; then
-#         cat >>"$NGINX_CONF_PATH" <<EOL
-#         add_header Onion-Location https://${ONION_ADDRESS}\$request_uri;
-        
-# EOL
-#     fi
-
         for LANGUAGE_CODE in ${SITE_LANGUAGE_CODES//,/ }; do
             STACK_NAME="$DOMAIN_IDENTIFIER-$LANGUAGE_CODE"
 
@@ -432,7 +440,7 @@ EOL
     }
 
 EOL
-
+fi
 
     if [ "$DEPLOY_NEXTCLOUD" = true ]; then
         cat >>"$NGINX_CONF_PATH" <<EOL
@@ -514,31 +522,6 @@ EOL
 EOL
     fi
 
-    # deploy Clams browser app under the primary domain.
-    if [ $iteration = 0 ]; then
-
-cat >> "$NGINX_CONF_PATH" <<EOF
-
-    # server block for the clams browser-app; just a static website
-    server {
-        listen 443 ssl;
-
-        server_name ${CLAMS_FQDN};
-
-        autoindex off;
-        server_tokens off;
-        
-        gzip_static on;
-
-        root /browser-app;
-        index 200.html;
-    }
-
-EOF
-
-
-    fi
-
     iteration=$((iteration+1))
 done
 

www/stub/nginx_yml.sh

@@ -30,9 +30,12 @@ EOL
 
     for LANGUAGE_CODE in ${SITE_LANGUAGE_CODES//,/ }; do
         # We create another ghost instance under /
+
+        if [ "$DEPLOY_GHOST" = true ]; then 
             cat >> "$DOCKER_YAML_PATH" <<EOL
       - ghostnet-$DOMAIN_IDENTIFIER-$LANGUAGE_CODE
 EOL
+        fi
     
         if [ "$LANGUAGE_CODE" = en ]; then
             if [ "$DEPLOY_GITEA" = "true" ]; then
@@ -47,7 +50,7 @@ EOL
 EOL
             fi
 
-                if [ -n "$NOSTR_ACCOUNT_PUBKEY" ]; then
+            if [ "$DEPLOY_NOSTR" = true ]; then
                 cat >> "$DOCKER_YAML_PATH" <<EOL
       - nostrnet-$DOMAIN_IDENTIFIER-en
 EOL
@@ -60,11 +63,11 @@ EOL
 
 cat >> "$DOCKER_YAML_PATH" <<EOL
     volumes:
-      - ${REMOTE_HOME}/letsencrypt:/etc/letsencrypt:ro
+      - ${REMOTE_DATA_PATH_LETSENCRYPT}:/etc/letsencrypt:ro
 EOL
     if [ "$DEPLOY_CLAMS" = true ]; then
         cat >> "$DOCKER_YAML_PATH" <<EOL
-      - clams-browser-app:/browser-app:ro
+      - ${REMOTE_CLAMS_PATH}:/browser-app
 EOL
     fi
 
@@ -82,15 +85,11 @@ configs:
 
 EOL
 
-
-
 ################ NETWORKS SECTION
-
 cat >> "$DOCKER_YAML_PATH" <<EOL
 networks:
 EOL
 
-
 for DOMAIN_NAME in ${DOMAIN_LIST//,/ }; do
     export DOMAIN_NAME="$DOMAIN_NAME"
     export SITE_PATH="$SITES_PATH/$DOMAIN_NAME"
@@ -100,21 +99,24 @@ EOL
     source "$SITE_PATH/site.conf"
     source ../../domain_env.sh
 
+
+    
+
     # for each language specified in the site.conf, we spawn a separate ghost container
     # at https://www.domain.com/$LANGUAGE_CODE
     for LANGUAGE_CODE in ${SITE_LANGUAGE_CODES//,/ }; do
+        if [ "$DEPLOY_GHOST" = true ]; then 
             cat >> "$DOCKER_YAML_PATH" <<EOL
   ghostnet-$DOMAIN_IDENTIFIER-$LANGUAGE_CODE:
     attachable: true
-
 EOL
+        fi
         
         if [ "$LANGUAGE_CODE" = en ]; then
             if [ "$DEPLOY_GITEA" = true ]; then
                 cat >> "$DOCKER_YAML_PATH" <<EOL
   giteanet-$DOMAIN_IDENTIFIER-en:
     attachable: true
-
 EOL
             fi
 
@@ -122,33 +124,25 @@ EOL
                 cat >> "$DOCKER_YAML_PATH" <<EOL
   nextcloudnet-$DOMAIN_IDENTIFIER-en:
     attachable: true
-
 EOL
             fi
 
-                if [ -n "$NOSTR_ACCOUNT_PUBKEY" ]; then
+            if [ "$DEPLOY_NOSTR" = true ]; then
                 cat >> "$DOCKER_YAML_PATH" <<EOL
   nostrnet-$DOMAIN_IDENTIFIER-en:
     attachable: true
-
 EOL
+    
             fi
         fi
     done
 done
 
-        if [ "$DEPLOY_CLAMS" = true ]; then
-            cat >> "$DOCKER_YAML_PATH" <<EOL
-volumes:
-  clams-browser-app:
-    external: true
-    name: clams-root
-EOL
-        fi
-
-
 if [ "$STOP_SERVICES" = false ]; then
-    docker stack deploy -c "$DOCKER_YAML_PATH" "reverse-proxy"
+    # for some reason we need to wait here. See if there's a fix; poll for service readiness?
+    sleep 5
+
+    docker stack deploy -c "$DOCKER_YAML_PATH" reverse-proxy
     # iterate over all our domains and create the nginx config file.
-    sleep 1
+    sleep 3
 fi

www/stub/nostr_yml.sh

@@ -14,8 +14,8 @@ for DOMAIN_NAME in ${DOMAIN_LIST//,/ }; do
     source "$SITE_PATH/site.conf"
     source ../../domain_env.sh
 
-    if [ -n "$NOSTR_ACCOUNT_PUBKEY" ]; then
-        REMOTE_NOSTR_PATH="$REMOTE_HOME/nostr"
+    if [ "$DEPLOY_NOSTR" = true ]; then
+        REMOTE_NOSTR_PATH="$REMOTE_DATA_PATH/nostr"
         NOSTR_PATH="$REMOTE_NOSTR_PATH/$DOMAIN_NAME"
         NOSTR_CONFIG_PATH="$SITE_PATH/webstack/nostr.config"
 
@@ -25,7 +25,6 @@ for DOMAIN_NAME in ${DOMAIN_LIST//,/ }; do
         export DOCKER_YAML_PATH="$SITE_PATH/webstack/nostr.yml"
 
         NET_NAME="nostrnet-$DOMAIN_IDENTIFIER"
-        DBNET_NAME="nostrdbnet-$DOMAIN_IDENTIFIER"
 
         # here's the NGINX config. We support ghost and nextcloud.
         echo "" > "$DOCKER_YAML_PATH"
@@ -90,7 +89,5 @@ EOL
             docker stack deploy -c "$DOCKER_YAML_PATH" "$DOMAIN_IDENTIFIER-nostr-$LANGUAGE_CODE"
             sleep 1
         fi
-    
     fi
-
 done